What is R 30C?
Andrew Vasquez What is R 30C?
R-30C Thermal Batt EcoTouch® insulation is available unfaced or with a kraft vapor retarder. 8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck.
What kind of insulation do you use for a cathedral ceiling?
In general, closed-cell foam is the best choice for unvented cathedral ceilings. It is also one of the most expensive, and most building inspectors will not allow it to be left uncovered (for fire-code reasons). Foil-faced iso-board can be cost-effective insulation for finished attics and cathedral ceilings.
What is R 49 insulation?
The Owens Corning Paperfaced R49 is a flexible fiberglass insulation proposed to control moisture in concealed applications in between the studs and joists. This EcoTouch Insulation from Owens Corning serves as a vapor barrier and bounds the home to stay cooler in summer and warmer in winter.
How many square feet are in a bag of r30 insulation?
88 sq ft
x 24 in. x 48 in. Batts (88 sq ft/bag)
How many inches is R30 batt?
Typical R-30 fiberglass insulation is 10-inches-thick. Prior to buying fiberglass insulation, it is important to measure the joint spacing you are working with. Note that the actual space between the framing members will be less than 16 or 24 inches, but the foam batts can easily be stuffed between these lengths.
How many inches deep is R30 insulation?
Fiberglass Chart
| R-Value | Thickness | Bags / 1000 Sq Ft |
|---|---|---|
| R49 | 16.25” | 22.6 |
| R44 | 14.75” | 20.1 |
| R38 | 12.75” | 16.8 |
| R30 | 10.25” | 13.0 |
What is the best insulation for a vaulted ceiling?
Most home contractors would probably tell you that the best insulation to use for a vaulted ceiling is fiberglass insulation. The main reasons are that fiberglass is one of the most inexpensive types of insulation that you can purchase, and fiberglass batts are relatively easy to install in vaulted ceilings.
What R value do I need for cathedral ceiling?
General principles. R-value minimums. In Climate Zones 4, 5, 6, 7, and 8, most prescriptive building codes require ceiling insulation to have a minimum R-value of R-49. In Zones 2 and 3, the minimum requirement is R-38, while in Zone 1, it’s R-30.
Is R49 insulation good?
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy’s (DOE) ranges for recommended levels of insulation below.
How deep is R49 blown?
16.25”
Fiberglass Chart
| R-Value | Thickness | Bags / 1000 Sq Ft |
|---|---|---|
| R49 | 16.25” | 22.6 |
| R44 | 14.75” | 20.1 |
| R38 | 12.75” | 16.8 |
| R30 | 10.25” | 13.0 |
How long is a roll of R30 insulation?
15 in. x 25 ft
R-30 PINK Unfaced Fiberglass Insulation Roll 15 in. x 25 ft. R-13 Pink Kraft Faced Fiberglass Insulation Continuous Roll 15 in.
What is R30 insulation made of?
Rockwool is mineral wool that is inorganic and can be used as thermal insulation in attics, wall cavities, and ceiling cavities with a depth or thickness of 10.9″ to attain R30. It is made of rock, furnace slag, and other organic materials.
