What is AMS 2471?
Jessica Hardy What is AMS 2471?
Standards for thin sulfuric anodizing are given by MIL-DTL-8625 Types II and IIB, class 1 (undyed) or class 2 (dyed), AMS 2471 (undyed), and AMS 2472 (dyed). Coatings thicker than 25 μm (0.001″) are known as Type III, hardcoat , hard anodizing, or engineered anodizing.
What is mil a 8625?
Military specification MIL-A-8625 is the model spec for many components that need anodized for the military and/or aerospace industry. The specification covers all the requirements needed for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys.
What is MIL A 8625 Type III?
TYPE III : HARD ANODIC COATINGS MIL-A-8625 Type III sulfuric acid anodizing at 36’F with a coating thickness of 2 – 2.5 mils (very thick!!). This kind of anodizing is accomplished with a bath similar to the standard sulfuric process, but with the temperature reduced to about 0° C to slow the dissolution rate.
Is zinc dichromate RoHS compliant?
The substance of concern with regard to chromate conversion coatings on zinc plating and RoHS compliance is hexavalent chromium. The RoHS Directive restricts hexavalent chromium, but does not restrict less hazardous trivalent chromium. Therefore all -ZI product plated after June 2002 is RoHS compliant.
Is stainless steel RoHS compliant?
8. Is stainless steel RoHS compliant? Yes. Although chromium is present in stainless steel, it’s not the hexavalent chromium restricted by RoHS.
Does anodizing increase thickness?
The anodizing process makes the oxidized surface much thicker, up to several thousandths of an inch thick. The hardness of the anodized aluminum oxide coating rivals that of a diamond, enhancing the abrasion resistance of the aluminum. Anodizing typically ranges up to 5 mils thickness.
How long does it take to Anodise Aluminium?
The anodising process itself takes about 30–40 minutes, with nothing particularly dramatic happening, so you will need to plan other activities to fill the time. At the start of the experiment, show the students the effervescence due to the hydrogen evolved from the cylindrical aluminium cathode.
What grade of Aluminium is best for anodising?
Hard anodising gives best results on 6061 or 6082 alloys, but 6000 and 7000 series aluminium is generally suitable for hard anodising. Hard anodising is possible on 5000 series alloys, but properties such as wear resistance will be compromised.
